CF-3 heading repeater compass
Product Description
Specifications
1.it has small volume
2.can be used for flush mounting,wall mounting or desk mounting
3.It ca
CF-3 heading repeater compass:
CF-3 heading repeater compass :
CF-3 heading repeater compass made by our company is a new type repeater compass , it has small volume and can be used for flush mounting,wall mounting or desk mounting . It can transmit the course heading indicated by the gyro compass to any places of the vessel where the course heading are needed , it adopts latest electronic technology and computer technology . If the signal of gyro compass is analog signal , you can use our modulus transducer to convert analog signal into digital signal and then inputted to the repeater compass.
Mechnical parameters:
Distinguish ability:0.025°
Reading precision:0.5°
Electric parameters:
Voltage:24V DC
Consumption power:about 6W
Course heading serial interface:Rs422 or RS232(NMEA)
NMEA interface:
RS422 interface 4800 baud
1 starting position,1 stopping postion,without polarity checkout.
Cycle time:120ms
Sending information according with NMEA-0183 standard 2.00 edition
Sentences accord with NMEA2.0(IEC61162-1)
----Gyro compass course heading:
HEHDT,xxx.x,T*cc,<CR><CF>