Reverse Osmosis Seawater Desalination Equipment
Product Description
Reverse Osmosis Seawater Desalination Equipment :
Product Description:
This product is whole system make up of Crispate Membrane Subassembly, High Pressure Pump, Pre-filtration System, Electro circuit Dominate System, Instrument etc.
Seawater pass Pre-filtration System entry High Pressure Pump, at the High Pressure Pump operation, seawater pass Crispate Membrane Subassembly, by Regulate Valve augment pressure, the product water permeate membrane pass the tube outflow the device, the NaCl and most seawater pass the another tube outflow the device.
The equipments adopts patent of company---change Filter-Core of don’t stop plant, pass conversion of valve, that can be change old Filter-Core when don’t stop the device.
If the seawater is relatively feculent, that is good way that adds the Multimedia Filter at front of the plant.
Available Type:
| Type | JBB-FSHB-1.0 | JBB-FSHB-2.0 | JBB-FSHB-3.0 | JBB-FSHB-5.0 | |
| Product Water Output (m3/d) | 1~1.5 | 2~3 | 3~4 | 5~6 | |
| Product Water Flow (L/h) | 50~60 | 100~130 | 150~180 | 200~250 | |
| Stabilize Salt Rejection (%) | ≥98 | ≥98 | ≥98 | ≥98 | |
| Product Water Concentration NaCl(mg/L) | ≤700 | ≤700 | ≤700 | ≤700 | |
| Operate Pressure (Mpa) | 4~6.5 | 4~6.5 | 4~6.5 | 4~6.5 | |
| Recovery (%) | 8~10 | 15~20 | 15~25 | 20~25 | |
| Power (kw) | 1.5 | 1.5 | 2.2 | 2.2 | |
| Operate Temperature (℃) | 5~40 | 5~40 | 5~40 | 5~40 | |
| Feed Water Flow (m3/h) | 1.1 | 1.1 | 0.6~1 | 1.5 | |
| Feed Water Pressure (MPa) | 0.1~0.3 | 0.1~0.3 | 0.1~0.3 | 0.1~0.3 | |
| Feed Water Temperature (℃) | 5~40 | 5~40 | 5~45 | 5~40 | |
| PH range | Series run | 2~11 | 2~11 | 2~11 | 2~11 |
| Short-term 30’rinse | 1~12 | 1~12 | 1~12 | 1~12 | |
| Rinse Trunk Cubage (L) | 7.5 | 7.5 | 11 | 12 | |
| Approx Weight (kg) | 110 | 120 | 140 | 140 | |
| Remark | Product Water Flow is Product Water Output at qualification that is Feed Water Temperature in 25℃, Feed Water concentration NaCl in 35000mg/l, Operate Pressure in 5MPa. | ||||