2.Certificates: ABS, BV, DNV, GL, LR,NK, RINA,KR,
3.Reliable quality with competit
Marine Integral Type Rubber Bearing CB*769-86
TZ Series Shafting Gliding Thrust Bearings
It is suitable for vessels that have a large thrust requirement and a small axial vibration
DTZ Large Pressure Intermediate Bearing
This kind of large pressure intermediate bearing is suitable for vessels whose shafting pressure is
(0.6MPa) larger than normative pressure and that need self-aligning.
GB/T 14364-93 Intermediate Bearing
It is suitable for vessels in inland water.Medium and large vessels are suggested to choose type B and C.
Large vessels are suggested to choose type C.
JQ/CS 48A Type Stern Tube Bearing
This type of bearings is used together with JQ/CS 48A sealing apparatus.
JQ/CS 39 Type Stern Tube Bearing
This type of bearings is suitable for inland water vessels whose stern bube working
medium is oil and that do not have a large stern shaft.
JT4175-86 Inland Water Vessel Shafting Intermediate Bearing
JT4175 Shafting Intermediate Bearing
It is suitable for vessel sailing on inland river
stern Tube White Metal Bearing
This bearing is suitable for vessels of different sizes whose lubricating medium is oil.
Macromolecule Polymerization Nylon Bearing
Macromolecule Polymerization Nylon Bearing has good comprehensive mechanical properties,good abrasion resistance, impact load,good self-lubrication and so on.Ship stern tube working medium is water,it is recommended the use of high polymers, nylon bearing. JQ/CS 49 Type Stern Tube Bearing
This type of stern tube bearing is suitable for inland water vessels whose stern bube working medium is oil.
Marine sliding type shafting intermediate shaft bearing is designed and manufactured according to GB/T14364-93 standard, which widely applied in the intermediate bearing of new build export marine propellers.
Scope of application
linear velocity 1.5~8 m/s
unit pressure ≤0.6 Mpa
lubricating oil temperature 65 0C
cooling water amount 0.5~7 t/h
JT/T259 intermediate bearing
This type of intermediate bearings is recommended for small and medium vessels in inland water.
B type gliding intermediate bearing. Type C is rolling intermediate bearing.
This type of intermediate bearings is recommended for small and medium vessels in inland
HPSD water lubrication stern shaft sealing apparatus
GCD Bulkhead transmission devices
It is suitable for transmission of power between airtight cabins of small and medium vessels.
The device conform to ship’s requirement.It is suitable for the pump shaft of vessel that transport crude oil,
petroleum,chemical liquid,or other shafting rhrough engine room,watertight bulkhead .
JZ shafting mechanical brake
it is suitable for small and medium vessels whose stern shafts need to be locked when they anchor.