China (Mainland)
Deyuan
CEV90/SA
Rubber
Low Voltage
Marine
Copper
PVC
Galvanized Steel Wire
Wooden Drum and Container Shipment
15-30days
Ship Cable:
EPR Insulated Shipboard Power cable 0.6/1 kV
SPECIFICATION & STANDARDS
IEC 60288 IEC60092-350 IEC60092-353 IEC60092-359
IEC60092 351 IEC60332-1 IEC60332-3Cat.A
IEC61034-2 IEC 60754-2 3A
Construction:
Conductor: tinned copper
Insulation: EPR
Filler
Tape
Inner sheath: PCP/CSP/PVC/PO (SHF1, SHF2)
Armored: tinned copper wire braid
(Galvanized steel wire braid)
Outer sheath: PVC/PO (SHF1, SHF2)
Flammability Features:
DA: Single cable flame retardant
SA: Bunched cable flame retardant
SC: Bunched cable flame retardant,halogen-free, low-smoke, low-toxicity.
Specifications:
Cores: 1, 2, 3, 4, 5, 7, 10, 12, 14, 16,19, 24, 27, 30, 33, 37.
Nominal Cross-section Areas: 1 mm2, 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2,
35mm2, 50mm2, 70mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2.
Application:
The cable is intended for power, lighting and control system of shipboard and off-shore building, and it is also available to metallurgical industry chemical works, power planted and mines etc.
Certificates:
CCS,LR,ABS,DNV,BV,GL,NK,RINA; 90
The radius of bend for the installation of cables
The radius of bend for the installation of cables
Cable structure features | Over diameter of cable(D) | Minimum internal bending radius |
Metal braided armored | Any value | 6D |
Non-armored | D≤25 | 4D |
D>25 | 6D |
Ship Cable:
EPR Insulated Shipboard Power cable 0.6/1 kV
SPECIFICATION & STANDARDS
IEC 60288 IEC60092-350 IEC60092-353 IEC60092-359
IEC60092 351 IEC60332-1 IEC60332-3Cat.A
IEC61034-2 IEC 60754-2 3A
Construction:
Conductor: tinned copper
Insulation: EPR
Filler
Tape
Inner sheath: PCP/CSP/PVC/PO (SHF1, SHF2)
Armored: tinned copper wire braid
(Galvanized steel wire braid)
Outer sheath: PVC/PO (SHF1, SHF2)
Flammability Features:
DA: Single cable flame retardant
SA: Bunched cable flame retardant
SC: Bunched cable flame retardant,halogen-free, low-smoke, low-toxicity.
Specifications:
Cores: 1, 2, 3, 4, 5, 7, 10, 12, 14, 16,19, 24, 27, 30, 33, 37.
Nominal Cross-section Areas: 1 mm2, 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2,
35mm2, 50mm2, 70mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2.
Application:
The cable is intended for power, lighting and control system of shipboard and off-shore building, and it is also available to metallurgical industry chemical works, power planted and mines etc.
Certificates:
CCS,LR,ABS,DNV,BV,GL,NK,RINA; 90
The radius of bend for the installation of cables
The radius of bend for the installation of cables
Cable structure features | Over diameter of cable(D) | Minimum internal bending radius |
Metal braided armored | Any value | 6D |
Non-armored | D≤25 | 4D |
D>25 | 6D |