Marine Hydrophore System

Marine Hydrophore System :  

1. Marine Hydrophore System Working Principle:

There will some reserve zone in the tank, after the water be pumped to the target level. Then the automatic pressure pump will pump some air into the tank to increase the pressure. So the water from the outlet on the bottom, which with pressure can flow to anywhere as the pipe system. Some water flow, and some air will increase.

2. Marine Hydrophore System Application:

Drinking water hydrophore, fresh water hydrophore, sea water hydrophore, and fire-fighting hydrophore, etc.

3. Marine Hydrophore System Capacity:

As IMO Regulations, the capacity usually be from 0.12m⊃3; to 3.0m⊃3;. We also accept customize.

Model	Overall Size(mm)				Base Size(mm)		Water Inlet	Water Outlet	Draining Outlet
	DN	L	B	H	A	B	DN
ZYG-0.2	500	1130	745	1635	1040	600	40	25	20
ZYG-0.3	600	1170	742	1690	1080	600		32	20
ZYG-0.5	700	1236	955	1920	1160	700		32	20
ZYG-1.0	900	1585	1216	2153	1510	960		40	20
ZYG-1.5	1000	1604	1310	2615	1600	1000		40	20
ZYG-2.0	1200	1812	1525	2473	1810	1220		40	25
ZYG-2.5	1200	1812	1525	2873	1810	1220		40	25

4. Marine Hydrophore System Pressure:

The working pressure usually be 0.4Mpa to 0.6 Mpa.